The rubber-tired gantry (RTG) crane is at the core of container terminal operations in today's world. Transporting tons of cargo in a crowded yard needs a reliable power source and accurate control. With more and more port operators switching from conventional diesel-electric design to save emissions and fuel, the number of electrified RTGs (E-RTGs) has increased dramatically.
Linking a multi-ton movable gantry crane to a stationary power supply is a very challenging engineering task. The electrification system depends on the performance of the RTG crane cable. A specialized
port crane cable has to deliver power continuously amid movement, mechanical loads, and coastal weather conditions.
Selecting the proper rubber-tired gantry crane cable has a direct impact on productivity and maintenance cost. This buying guide explains the principles of the RTG power supply system, requirements and characteristics for the cable to use, and technical specifications to consider when placing the order.
How Does the Power Supply System Work in an RTG Crane?
For proper selection of the type of cable, you have to evaluate the way the crane draws its power. There are three main types of power systems used in modern container yards, each carrying different demands for cabling.
Diesel-Electric RTG vs. Electrified RTG
RTGs use an onboard diesel generator to supply their motors with power. Being producers of electricity, they can operate independently of any ground-based infrastructure and do not need long and flexible trailing power cables.
Electrified RTGs (E-RTGs) draw energy directly from the port grid. By swapping diesel engines for grid power, terminal operators cut direct exhaust emissions and lower hourly operating expenses. Power reaches an E-RTG through conductor bar busways or motorized cable reels mounted to the crane structure.
Some terminals utilize hybrid RTGs. These systems run on grid power during routine container stacking, then switch to a compact onboard battery pack or auxiliary diesel engine when driving between different yard blocks.
Cable Reel Power Supply for Rubber-Tired Gantry Cranes
Motorized cable reel systems represent one of the most reliable methods for delivering high voltage to E-RTGs. One end of the cable attaches to a ground feed junction box in the yard, while the main body winds onto a reel mounted on the gantry frame.
Power Supply Configuration:
As the RTG travels down the container stack, the reel automatically feeds or takes up the cable under controlled tension. Ground trenches or raised guide channels keep the cable aligned along the runway, protecting it from cross-traffic.
Many modern E-RTGs rely on
composite cables. Rather than running separate infrastructure for power and communication, a composite RTG crane power cable integrates heavy-gauge power conductors alongside multi-mode or single-mode fiber optic cores. This allows real-time data exchange between the crane's
programmable logic controllers (PLCs), remote monitoring stations, and yard management systems (YMS).
Reel-fed power works exceptionally well along fixed, linear travel paths. However, transferring a cable-reeled E-RTG to an adjacent container block requires crew intervention. Operators must disconnect the power feed, roll up the remaining cable, drive the crane laterally using auxiliary power, and re-plug at the new terminal bay.
What Are the Key Requirements for RTG Crane Power Cables?
Due to the dynamic operation of cable reels, ordinary stationary power cables will soon fail when used in gantry cranes. This is because RTG cable reels have to withstand different kinds of stresses at the same time.
Electrical Requirements: Voltage, Current, and Configuration
Port infrastructure designs dictate voltage ratings. High-capacity E-RTGs are commonly connected directly to the electrical grid to receive medium-voltage electricity, which ranges from 3.0 kV to 10 kV. The step-down transformer installed on board subsequently reduces the voltage to low-voltage electricity for powering drive motors and other devices.
- Conductor Sizing: The cross-sectional size of conductors should be large enough to handle peak load conditions, starter current, and thermal considerations while minimizing voltage losses over long distances.
- Composite Construction: Integrating power core, grounding core, control core, and fiber optic tubes in a single insulated package solves the problem of friction and tangling of multiple wires.
- Electrical Shielding: Semi-conductive layers and metallic shielding ensure that the electrical field remains stable throughout the medium-voltage conductors, eliminating insulation breakdown and fiber optic wire exposure to electromagnetic interference (EMI).
Key Electrical Specifications
Requirement Component | Primary Technical Consideration |
Rated Voltage | Medium voltage (3 kV – 10 kV) for main reel; low voltage for internal distribution |
Data Transmission | Integrated fiber optic elements (8, 12, or 24 cores) for system control |
Conductor Lay | Short lay length flexible copper wire (Class 5 or Class 6) |
Shielding | Individual phase screening plus overall metallic braid |
Mechanical Requirements for Cable Reel Operation
Winding and unwinding from a fast-moving drum put immense stress on both the inner copper cores and outer jackets of the cables.
- Dynamic Flexibility: Fine-stranded, annealed tinned copper wires ensure the cable’s flexibility required for passing through narrow guide sheaves without work-hardening the copper wires.
- Tensile Load Resistance: The constant winding process causes linear stress. Premium quality RTG cables have a central tensile load relief element consisting of aramid yarn (Kevlar) or other high-strength synthetic fibers to relieve the pulling stress and make the copper conductors weightless.
- Torsion and Twist Resistance: Inconsistent reeling or misalignment of the guide rollers may cause torsion stress along the longitudinal axis of the cable. Special anti-twist braids, interwoven into the synthetic layer under the copper cores, prevent the cores from twisting out of place in what is called “corkscrewing.”
- Abrasion Resistance: Sliding along the guide rollers or rubbing against the concrete edges of the ground trench will destroy basic rubber jackets. Thick polyurethane (PUR) or special chlorosulfonated polyethylene (CSM/CR) outer jackets withstand high mechanical stress.
Field reports for port equipment reveal that poorly set reel drive motors lead to premature cable wear. Either too high tension will stretch the cable strain core, or insufficient tension will make the cable sag from the runway into contact with structural steel or ground objects.
Environmental Requirements in Container Terminals
Marine terminals put electrical components through severe environmental conditions all year round.
- UV and Weathering: Exposure to UV light results in weathering of sheath materials without UV protection.
- Oil and Chemical Resistance: Port facilities are characterized by the presence of hydraulic oils, gear oils, and diesel fuel. Cable materials should not degrade or swell in oil exposure.
- Moisture Protection: Cables installed in ground troughs are usually exposed to rainwater or seawater. Water-blocking tapes protect cables from water infiltration in case of small damage to the sheath material.
- Temperature Extremes: Cables should stay flexible at subzero winter temperatures and dissipate heat generated inside at full motor loading.
How to Select and Specify the Right RTG Crane Cable
Selecting an RTG crane cable depends on providing the right engineering criteria to the supplier. Buying a power cable based on its outer diameter or simply the gauge of the cable will result in inappropriate fitment and premature failure of the cable.
Key Information to Provide When Ordering
In the process of requesting a quotation (RFQ) or discussing with a cable design engineer, the following information should be provided:
- System Type: Whether it is a new E-RTG system, a conversion from a diesel to an electric system, or a direct replacement of the existing machine.
- Electrical Profile: Voltage of operation (kV), frequency (Hz), total kW motor load, and continuous current (A).
- Reeling Dynamics: Mono spiral or cylindrical reeling system, size of reel drum, maximum velocity (m/min), rate of acceleration, and total length of windings.
- Physical Configuration: Number of conductors required, earth conductor configuration, and total number of optical fiber cores in the cable (including the desired specifications of the optical fibers, such as 50/125 µm or 62.5/125 µm).
- Site Conditions: Range of ambient temperatures, coastal location, salt fog environment, and trench sizes.
What to Check Before Finalizing the Cable Specification
Before approving the technical drawings, ensure that these properties of the cable are consistent with your gantry reel mechanism:
- Outer Diameter and Weight: The cable's outer diameter must be consistent with the drum's winding diameter. A cable that is too large will roll over the flange of the drum, whereas a cable that is too small will not wind tightly and uniformly.
- Minimum Bending Radius: The bending radius of the cable needs to match all guide rollers, sheaves, and the curved funnel entrance on the crane. Utilizing a smaller bending radius than that recommended by the manufacturer results in accelerated fatigue of the cable's core.
- Working Tension Limits: The maximum permissible tensile load capacity of the cable should exceed the pull force applied to the cable from the motorized reel drive.
- Connector Compatibility: Verify that the cable diameter and core specifications are compatible with the preferred medium voltage connectors and fiber optic junction boxes of the terminal.
An evaluation of original equipment drawings is an effective start, but it is important to check failure logs before ordering again. If you have experienced cable failure from outer jacket splitting and/or core breaking in the past, be sure to inform your vendor of this problem. Today’s cable producers are capable of modifying sheath hardness, changing the lay ratio of inner strands, and adding new central aramid strain member cables that could solve problems at your terminal.
Choosing an RTG crane cable comes down to considering the combination of electrical capacity with great dynamic flexibility and mechanical strength. An evaluation of the speed of reeling and voltage system at your terminal beforehand will ensure an efficient power supply and optimum crane availability.
If you are working on the conversion of your E-RTG or just need to replace a trailing cable in your fleet,
contact our technical sales experts now. Provide us with your crane specifications, reel sizes, and electrical requirements, and we will help you choose the most suitable heavy-duty cable product.